Expansion Shield X200 for Raspberry Pi B+/2B/3B


Expansion Shield X200 for Raspberry Pi B+/2B/3B

Product no.: DFR0357

In stock
Delivery period: 1 working days

45.00
Price incl. VAT, plus delivery


The Expansion Shield X200 is a most cost-effective shield which could be applied to Raspberry Pi Model B+, Raspberry Pi 2 Model B and newest Raspberry Pi 3 Model B. It integrates a lot of very useful functions such as RTC real time clock; audio input and output; VGA output; USB hub; WIFI; 8-way GPIO. With this shield, you can build Raspberry Pi projects more easily and save both time and cost.
 
 
SPECIFICATION
  • Input Voltage: 6V to 21Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi 
  • VGA output: HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC  
  • Audio: 3.5mm MIC in jack 
    • 3.5mm stereo audio jack
    • SPDIF output
    • Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
  • Wireless: WiFi (IEEE 802.11b/g/n) with external antenna 
    • IR sensor (38KHz)
  • USB Storage: Self-powered USB hub with 3 ports 
  • Real-time clock (RTC): Based on DS3231SN with included CR2032 battery
  • GPIO Control: 8-channel Darlington driver chip  (ULN2803) allowing to control electronic circuits which require more current 
  • Misc: Power output socket 
    • Camera flex slot so camera can still be used with the expansion board attached
    • DIP switch to remove connection from RPi’s pin header
    • Directly connected on top of the Raspberry Pi using the board GPIO header pins 
    • No wiring nor soldering is required 
    • Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards 
    • Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!
  • Dimensions: 85 x 56mm (3.35 x 2.20") (Same size as Raspberry Pi)
Note: When you power Raspberry Pi with the shield power resource, please don't power it again via the Micro-USB port, it will damage the board!
 
 
DOCUMENTS
 
SHIPPING LIST
  • X200 Raspberry Pi expansion board x 1
  • HDMI adapter x 1
  • USB adapter x 1
  • 2.4GHz WIFI antenna x 1
  • Nylon spacers (M3 x 20mm) x 4
  • Nylon screws  (M3 x 6mm) x 8
Browse this category: Raspberry Pi - Modules, Sensors, Shields